Bend 30° Reinforced Spiro

Bend 30° Reinforced Spiro Art nr Show models Hide models

100 mm 3024
125 mm 3126
160 mm 3025
200 mm 3026
250 mm 3027

An effective tubing system has to meet certain requirements. Constant transport velocity in the tubing at different loads is one require­ment. Correct transport velocity is another. When the velocity is too low, the material will cause a blockage. When the velocity is to high, this will lead to unnecessary wear and loss of energy. Dustcontrol's competent staff can dimension a system to your needs.  

When transporting material in a tubing system turbulent flow will cause noise. Material particles impact the hard tubing walls. Using an elastomer (EPDM- and NBR-rubber) in bends, branch pipes and mounting brackets moderates the sound considerably.  

Bends and branch pipes are designed to withstand high negative pressure. The bends are designed with a radial ridge to spread the impact area of the mateial thereby reducing wear and minimizing the risk of blockage.  

Every elastomer bend and branch pipe are designed with a plugged hole, that can be used for measuring and inspection. The advantages with the elastomer tubing system are:

  • Low noise
  • Blockage risk reduced
  • Reduced wear

The measurements are in millimeter if nothing else is given.


Part No d (mm) L (mm) r (mm) m (kg)
3024 100 28 100 0.3
3126 125 33 125 0.3
3025 160 43 160 0.5
3026 200 54 200 0.7
3027 250 67 250 1.4